Seth/kernel_amazon_mt8127-common
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity
Files
cm-14.1
kernel_amazon_mt8127-common/include/mach/battery_common.h
T
ggow fddef9b0e1 Add required changes for austin and ford
2019-04-21 09:20:06 +01:00

247 lines
8.2 KiB
C
Raw Permalink Blame History

#ifndef BATTERY_COMMON_H
#define BATTERY_COMMON_H
#include <linux/ioctl.h>
#include <mach/mt_typedefs.h>
#include "charging.h"
/*****************************************************************************
* BATTERY VOLTAGE
****************************************************************************/
#define PRE_CHARGE_VOLTAGE 3200
#define SYSTEM_OFF_VOLTAGE 3400
#define CONSTANT_CURRENT_CHARGE_VOLTAGE 4100
#define CONSTANT_VOLTAGE_CHARGE_VOLTAGE 4200
#define CV_DROPDOWN_VOLTAGE 4000
#define CHARGER_THRESH_HOLD 4300
#define BATTERY_UVLO_VOLTAGE 2700
/*****************************************************************************
* BATTERY TIMER
****************************************************************************/
/* #define MAX_CHARGING_TIME 1*60*60 // 1hr */
/* #define MAX_CHARGING_TIME 8*60*60 // 8hr */
#ifdef CONFIG_AUSTIN_PROJECT
#define MAX_CHARGING_TIME 12*60*60 /* 12hr */
#else
#define MAX_CHARGING_TIME 24*60*60 /* 24hr */
#endif
#define MAX_POSTFULL_SAFETY_TIME 1*30*60 /* 30mins */
#define MAX_PreCC_CHARGING_TIME 1*30*60 /* 0.5hr */
/* #define MAX_CV_CHARGING_TIME 1*30*60 // 0.5hr */
#define MAX_CV_CHARGING_TIME 3*60*60 /* 3hr */
#define MUTEX_TIMEOUT 5000
#define BAT_TASK_PERIOD 10 /* 10sec */
#define g_free_bat_temp 1000 /* 1 s */
/*****************************************************************************
* BATTERY Protection
****************************************************************************/
#define Battery_Percent_100 100
#define charger_OVER_VOL 1
#define BATTERY_UNDER_VOL 2
#define BATTERY_OVER_TEMP 3
#define ADC_SAMPLE_TIMES 5
/*****************************************************************************
* Pulse Charging State
****************************************************************************/
#define CHR_PRE 0x1000
#define CHR_CC 0x1001
#define CHR_TOP_OFF 0x1002
#define CHR_POST_FULL 0x1003
#define CHR_BATFULL 0x1004
#define CHR_ERROR 0x1005
#define CHR_HOLD 0x1006
/*****************************************************************************
* CallState
****************************************************************************/
#define CALL_IDLE 0
#define CALL_ACTIVE 1
/*****************************************************************************
* Enum
****************************************************************************/
typedef unsigned int WORD;
typedef enum {
PMU_STATUS_OK = 0,
PMU_STATUS_FAIL = 1,
} PMU_STATUS;
typedef enum {
USB_SUSPEND = 0,
USB_UNCONFIGURED,
USB_CONFIGURED
} usb_state_enum;
/*****************************************************************************
* JEITA battery temperature standard
charging info ,like temperatue, charging current, re-charging voltage, CV threshold would be reconfigurated.
Temperature hysteresis default 6C.
Reference table:
degree AC Current USB current CV threshold Recharge Vol hysteresis condition
> 60 no charging current, X X <54(Down)
45~60 600mA 450mA 4.1V 4V <39(Down) >60(Up)
10~45 600mA 450mA 4.2V 4.1V <10(Down) >45(Up)
0~10 600mA 450mA 4.1V 4V <0(Down) >16(Up)
-10~0 200mA 200mA 4V 3.9V <-10(Down) >6(Up)
<-10 no charging current, X X >-10(Up)
****************************************************************************/
typedef enum {
TEMP_BELOW_NEG_10 = 0,
TEMP_NEG_10_TO_POS_0,
TEMP_POS_0_TO_POS_10,
TEMP_POS_10_TO_POS_45,
TEMP_POS_45_TO_POS_60,
TEMP_ABOVE_POS_60
} temp_state_enum;
#define TEMP_POS_60_THRESHOLD 60
#define TEMP_POS_60_THRES_MINUS_X_DEGREE 60
#define TEMP_POS_45_THRESHOLD 45
#define TEMP_POS_45_THRES_MINUS_X_DEGREE 45
#ifdef CONFIG_AUSTIN_PROJECT
#define TEMP_POS_10_THRESHOLD 15
#define TEMP_POS_10_THRES_PLUS_X_DEGREE 15
#else
#define TEMP_POS_10_THRESHOLD 10
#define TEMP_POS_10_THRES_PLUS_X_DEGREE 10
#endif
#define TEMP_POS_0_THRESHOLD 0
#define TEMP_POS_0_THRES_PLUS_X_DEGREE 0
#ifdef CONFIG_MTK_FAN5405_SUPPORT
#define TEMP_NEG_10_THRESHOLD 0
#define TEMP_NEG_10_THRES_PLUS_X_DEGREE 0
#elif defined(CONFIG_MTK_BQ24158_SUPPORT)
#define TEMP_NEG_10_THRESHOLD 0
#define TEMP_NEG_10_THRES_PLUS_X_DEGREE 0
#else
#define TEMP_NEG_10_THRESHOLD 0
#define TEMP_NEG_10_THRES_PLUS_X_DEGREE 0
#endif
/*****************************************************************************
* Normal battery temperature state
****************************************************************************/
typedef enum {
TEMP_POS_LOW = 0,
TEMP_POS_NORMAL,
TEMP_POS_HIGH
} batt_temp_state_enum;
/*****************************************************************************
* Test Mode
****************************************************************************/
typedef enum {
TESTMODE_NONE = 0,
TESTMODE_DISABLE_CHARGING,
TESTMODE_ENABLE_CHARGING,
} batt_test_mode_enum;
/*****************************************************************************
* structure
****************************************************************************/
typedef struct {
kal_bool bat_exist;
kal_bool bat_full;
INT32 bat_charging_state; /* use leading 16bit for test mode use */
UINT32 bat_vol;
kal_bool bat_in_recharging_state;
kal_uint32 Vsense;
kal_bool charger_exist;
UINT32 charger_vol;
INT32 charger_protect_status;
INT32 ICharging;
INT32 IBattery;
INT32 temperature;
INT32 temperatureR;
INT32 temperatureV;
UINT32 total_charging_time;
UINT32 PRE_charging_time;
UINT32 CC_charging_time;
UINT32 TOPOFF_charging_time;
UINT32 POSTFULL_charging_time;
UINT32 charger_type;
INT32 SOC;
INT32 UI_SOC;
UINT32 nPercent_ZCV;
UINT32 nPrecent_UI_SOC_check_point;
UINT32 ZCV;
kal_bool bat_in_charging_enable;
} PMU_ChargerStruct;
/*****************************************************************************
* Extern Variable
****************************************************************************/
extern PMU_ChargerStruct BMT_status;
extern CHARGING_CONTROL battery_charging_control;
extern kal_bool g_ftm_battery_flag;
extern int charging_level_data[1];
extern kal_bool g_call_state;
extern kal_bool g_charging_full_reset_bat_meter;
extern signed int g_custom_charging_current;
extern signed int g_custom_charging_cv;
#ifdef CONFIG_AUSTIN_PROJECT
extern unsigned int g_custom_charging_mode;
#endif
#if defined(CONFIG_MTK_PUMP_EXPRESS_SUPPORT) || defined(CONFIG_MTK_PUMP_EXPRESS_PLUS_SUPPORT)
extern kal_bool ta_check_chr_type;
extern kal_bool ta_cable_out_occur;
extern kal_bool is_ta_connect;
extern struct wake_lock TA_charger_suspend_lock;
#endif
/*****************************************************************************
* Extern Function
****************************************************************************/
extern void charging_suspend_enable(void);
extern void charging_suspend_disable(void);
extern kal_bool bat_is_charger_exist(void);
extern kal_bool bat_is_charging_full(void);
extern kal_uint32 bat_get_ui_percentage(void);
extern kal_uint32 get_charging_setting_current(void);
extern kal_uint32 bat_is_recharging_phase(void);
extern void do_chrdet_int_task(void);
extern void set_usb_current_unlimited(bool enable);
extern bool get_usb_current_unlimited(void);
extern CHARGER_TYPE mt_get_charger_type(void);
#ifdef CONFIG_MTK_SMART_BATTERY
extern void wake_up_bat(void);
extern unsigned long BAT_Get_Battery_Voltage(int polling_mode);
extern void mt_battery_charging_algorithm(void);
#if defined(CONFIG_MTK_JEITA_STANDARD_SUPPORT)
extern PMU_STATUS do_jeita_state_machine(void);
#endif
#else
#define wake_up_bat() do {} while (0)
#define BAT_Get_Battery_Voltage(polling_mode) ({ 0; })
#endif
#ifdef CONFIG_MTK_POWER_EXT_DETECT
extern kal_bool bat_is_ext_power(void);
#endif
#endif /* #ifndef BATTERY_COMMON_H */
Reference in New Issue View Git Blame Copy Permalink