commit 85bcf96caba8b4a7c0805555638629ba3c67ea0c upstream.
ASUS ROG Ranger VIII with ALC1150 codec requires the extra GPIO pin to
up for the front panel. Just use the existing fixup for setting up
the GPIO pins.
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=189411
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Willy Tarreau <w@1wt.eu>
commit 7c42631376306fb3f34d51fda546b50a9b6dd6ec upstream.
The priv->cmd_msg_buffer is allocated in the probe function, but never
kfree()ed. This patch converts the kzalloc() to resource-managed
kzalloc.
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Willy Tarreau <w@1wt.eu>
commit a06393ed03167771246c4c43192d9c264bc48412 upstream.
When removing a bcm tx operation either a hrtimer or a tasklet might run.
As the hrtimer triggers its associated tasklet and vice versa we need to
take care to mutually terminate both handlers.
Reported-by: Michael Josenhans <michael.josenhans@web.de>
Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net>
Tested-by: Michael Josenhans <michael.josenhans@web.de>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Willy Tarreau <w@1wt.eu>
commit befa60113ce7ea270cb51eada28443ca2756f480 upstream.
In order to make the driver work with the common clock framework, this
patch converts the clk_enable()/clk_disable() to
clk_prepare_enable()/clk_disable_unprepare().
Also add error checking for clk_prepare_enable().
Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Willy Tarreau <w@1wt.eu>
commit c97c52be78b8463ac5407f1cf1f22f8f6cf93a37 upstream.
The priv->device pointer for c_can_pci is never set, but it is used
without a NULL check in c_can_start(). Setting it in c_can_pci_probe()
like c_can_plat_probe() prevents c_can_pci.ko from crashing, with and
without CONFIG_PM.
This might also cause the pm_runtime_*() functions in c_can.c to
actually be executed for c_can_pci devices - they are the only other
place where priv->device is used, but they all contain a null check.
Signed-off-by: Einar Jón <tolvupostur@gmail.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Willy Tarreau <w@1wt.eu>
commit b67d0dd7d0dc9e456825447bbeb935d8ef43ea7c upstream.
Fix for bad memory access while disconnecting. netdev is freed before
private data free, and dev is accessed after freeing netdev.
This makes a slub problem, and it raise kernel oops with slub debugger
config.
Signed-off-by: Jiho Chu <jiho.chu@samsung.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Willy Tarreau <w@1wt.eu>
commit 332b05ca7a438f857c61a3c21a88489a21532364 upstream.
This patch adds a check to limit the number of can_filters that can be
set via setsockopt on CAN_RAW sockets. Otherwise allocations > MAX_ORDER
are not prevented resulting in a warning.
Reference: https://lkml.org/lkml/2016/12/2/230
Reported-by: Andrey Konovalov <andreyknvl@google.com>
Tested-by: Andrey Konovalov <andreyknvl@google.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Willy Tarreau <w@1wt.eu>
commit 3d46a44a0c01b15d385ccaae24b56f619613c256 upstream.
PID: 614 TASK: ffff882a739da580 CPU: 3 COMMAND: "ocfs2dc"
#0 [ffff882ecc3759b0] machine_kexec at ffffffff8103b35d
#1 [ffff882ecc375a20] crash_kexec at ffffffff810b95b5
#2 [ffff882ecc375af0] oops_end at ffffffff815091d8
#3 [ffff882ecc375b20] die at ffffffff8101868b
#4 [ffff882ecc375b50] do_trap at ffffffff81508bb0
#5 [ffff882ecc375ba0] do_invalid_op at ffffffff810165e5
#6 [ffff882ecc375c40] invalid_op at ffffffff815116fb
[exception RIP: ocfs2_ci_checkpointed+208]
RIP: ffffffffa0a7e940 RSP: ffff882ecc375cf0 RFLAGS: 00010002
RAX: 0000000000000001 RBX: 000000000000654b RCX: ffff8812dc83f1f8
RDX: 00000000000017d9 RSI: ffff8812dc83f1f8 RDI: ffffffffa0b2c318
RBP: ffff882ecc375d20 R8: ffff882ef6ecfa60 R9: ffff88301f272200
R10: 0000000000000000 R11: 0000000000000000 R12: ffffffffffffffff
R13: ffff8812dc83f4f0 R14: 0000000000000000 R15: ffff8812dc83f1f8
ORIG_RAX: ffffffffffffffff CS: 0010 SS: 0018
#7 [ffff882ecc375d28] ocfs2_check_meta_downconvert at ffffffffa0a7edbd [ocfs2]
#8 [ffff882ecc375d38] ocfs2_unblock_lock at ffffffffa0a84af8 [ocfs2]
#9 [ffff882ecc375dc8] ocfs2_process_blocked_lock at ffffffffa0a85285 [ocfs2]
assert is tripped because the tran is not checkpointed and the lock level is PR.
Some time ago, chmod command had been executed. As result, the following call
chain left the inode cluster lock in PR state, latter on causing the assert.
system_call_fastpath
-> my_chmod
-> sys_chmod
-> sys_fchmodat
-> notify_change
-> ocfs2_setattr
-> posix_acl_chmod
-> ocfs2_iop_set_acl
-> ocfs2_set_acl
-> ocfs2_acl_set_mode
Here is how.
1119 int ocfs2_setattr(struct dentry *dentry, struct iattr *attr)
1120 {
1247 ocfs2_inode_unlock(inode, 1); <<< WRONG thing to do.
..
1258 if (!status && attr->ia_valid & ATTR_MODE) {
1259 status = posix_acl_chmod(inode, inode->i_mode);
519 posix_acl_chmod(struct inode *inode, umode_t mode)
520 {
..
539 ret = inode->i_op->set_acl(inode, acl, ACL_TYPE_ACCESS);
287 int ocfs2_iop_set_acl(struct inode *inode, struct posix_acl *acl, ...
288 {
289 return ocfs2_set_acl(NULL, inode, NULL, type, acl, NULL, NULL);
224 int ocfs2_set_acl(handle_t *handle,
225 struct inode *inode, ...
231 {
..
252 ret = ocfs2_acl_set_mode(inode, di_bh,
253 handle, mode);
168 static int ocfs2_acl_set_mode(struct inode *inode, struct buffer_head ...
170 {
183 if (handle == NULL) {
>>> BUG: inode lock not held in ex at this point <<<
184 handle = ocfs2_start_trans(OCFS2_SB(inode->i_sb),
185 OCFS2_INODE_UPDATE_CREDITS);
ocfs2_setattr.#1247 we unlock and at #1259 call posix_acl_chmod. When we reach
ocfs2_acl_set_mode.#181 and do trans, the inode cluster lock is not held in EX
mode (it should be). How this could have happended?
We are the lock master, were holding lock EX and have released it in
ocfs2_setattr.#1247. Note that there are no holders of this lock at
this point. Another node needs the lock in PR, and we downconvert from
EX to PR. So the inode lock is PR when do the trans in
ocfs2_acl_set_mode.#184. The trans stays in core (not flushed to disc).
Now another node want the lock in EX, downconvert thread gets kicked
(the one that tripped assert abovt), finds an unflushed trans but the
lock is not EX (it is PR). If the lock was at EX, it would have flushed
the trans ocfs2_ci_checkpointed -> ocfs2_start_checkpoint before
downconverting (to NULL) for the request.
ocfs2_setattr must not drop inode lock ex in this code path. If it
does, takes it again before the trans, say in ocfs2_set_acl, another
cluster node can get in between, execute another setattr, overwriting
the one in progress on this node, resulting in a mode acl size combo
that is a mix of the two.
Orabug: 20189959
Signed-off-by: Tariq Saeed <tariq.x.saeed@oracle.com>
Reviewed-by: Mark Fasheh <mfasheh@suse.de>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Joseph Qi <joseph.qi@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Willy Tarreau <w@1wt.eu>
commit e7ee2c089e94067d68475990bdeed211c8852917 upstream.
The crash happens rather often when we reset some cluster nodes while
nodes contend fiercely to do truncate and append.
The crash backtrace is below:
dlm: C21CBDA5E0774F4BA5A9D4F317717495: dlm_recover_grant 1 locks on 971 resources
dlm: C21CBDA5E0774F4BA5A9D4F317717495: dlm_recover 9 generation 5 done: 4 ms
ocfs2: Begin replay journal (node 318952601, slot 2) on device (253,18)
ocfs2: End replay journal (node 318952601, slot 2) on device (253,18)
ocfs2: Beginning quota recovery on device (253,18) for slot 2
ocfs2: Finishing quota recovery on device (253,18) for slot 2
(truncate,30154,1):ocfs2_truncate_file:470 ERROR: bug expression: le64_to_cpu(fe->i_size) != i_size_read(inode)
(truncate,30154,1):ocfs2_truncate_file:470 ERROR: Inode 290321, inode i_size = 732 != di i_size = 937, i_flags = 0x1
------------[ cut here ]------------
kernel BUG at /usr/src/linux/fs/ocfs2/file.c:470!
invalid opcode: 0000 [#1] SMP
Modules linked in: ocfs2_stack_user(OEN) ocfs2(OEN) ocfs2_nodemanager ocfs2_stackglue(OEN) quota_tree dlm(OEN) configfs fuse sd_mod iscsi_tcp libiscsi_tcp libiscsi scsi_transport_iscsi af_packet iscsi_ibft iscsi_boot_sysfs softdog xfs libcrc32c ppdev parport_pc pcspkr parport joydev virtio_balloon virtio_net i2c_piix4 acpi_cpufreq button processor ext4 crc16 jbd2 mbcache ata_generic cirrus virtio_blk ata_piix drm_kms_helper ahci syscopyarea libahci sysfillrect sysimgblt fb_sys_fops ttm floppy libata drm virtio_pci virtio_ring uhci_hcd virtio ehci_hcd usbcore serio_raw usb_common sg dm_multipath dm_mod scsi_dh_rdac scsi_dh_emc scsi_dh_alua scsi_mod autofs4
Supported: No, Unsupported modules are loaded
CPU: 1 PID: 30154 Comm: truncate Tainted: G OE N 4.4.21-69-default #1
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.8.1-0-g4adadbd-20151112_172657-sheep25 04/01/2014
task: ffff88004ff6d240 ti: ffff880074e68000 task.ti: ffff880074e68000
RIP: 0010:[<ffffffffa05c8c30>] [<ffffffffa05c8c30>] ocfs2_truncate_file+0x640/0x6c0 [ocfs2]
RSP: 0018:ffff880074e6bd50 EFLAGS: 00010282
RAX: 0000000000000074 RBX: 000000000000029e RCX: 0000000000000000
RDX: 0000000000000001 RSI: 0000000000000246 RDI: 0000000000000246
RBP: ffff880074e6bda8 R08: 000000003675dc7a R09: ffffffff82013414
R10: 0000000000034c50 R11: 0000000000000000 R12: ffff88003aab3448
R13: 00000000000002dc R14: 0000000000046e11 R15: 0000000000000020
FS: 00007f839f965700(0000) GS:ffff88007fc80000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b
CR2: 00007f839f97e000 CR3: 0000000036723000 CR4: 00000000000006e0
Call Trace:
ocfs2_setattr+0x698/0xa90 [ocfs2]
notify_change+0x1ae/0x380
do_truncate+0x5e/0x90
do_sys_ftruncate.constprop.11+0x108/0x160
entry_SYSCALL_64_fastpath+0x12/0x6d
Code: 24 28 ba d6 01 00 00 48 c7 c6 30 43 62 a0 8b 41 2c 89 44 24 08 48 8b 41 20 48 c7 c1 78 a3 62 a0 48 89 04 24 31 c0 e8 a0 97 f9 ff <0f> 0b 3d 00 fe ff ff 0f 84 ab fd ff ff 83 f8 fc 0f 84 a2 fd ff
RIP [<ffffffffa05c8c30>] ocfs2_truncate_file+0x640/0x6c0 [ocfs2]
It's because ocfs2_inode_lock() get us stale LVB in which the i_size is
not equal to the disk i_size. We mistakenly trust the LVB because the
underlaying fsdlm dlm_lock() doesn't set lkb_sbflags with
DLM_SBF_VALNOTVALID properly for us. But, why?
The current code tries to downconvert lock without DLM_LKF_VALBLK flag
to tell o2cb don't update RSB's LVB if it's a PR->NULL conversion, even
if the lock resource type needs LVB. This is not the right way for
fsdlm.
The fsdlm plugin behaves different on DLM_LKF_VALBLK, it depends on
DLM_LKF_VALBLK to decide if we care about the LVB in the LKB. If
DLM_LKF_VALBLK is not set, fsdlm will skip recovering RSB's LVB from
this lkb and set the right DLM_SBF_VALNOTVALID appropriately when node
failure happens.
The following diagram briefly illustrates how this crash happens:
RSB1 is inode metadata lock resource with LOCK_TYPE_USES_LVB;
The 1st round:
Node1 Node2
RSB1: PR
RSB1(master): NULL->EX
ocfs2_downconvert_lock(PR->NULL, set_lvb==0)
ocfs2_dlm_lock(no DLM_LKF_VALBLK)
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
dlm_lock(no DLM_LKF_VALBLK)
convert_lock(overwrite lkb->lkb_exflags
with no DLM_LKF_VALBLK)
RSB1: NULL RSB1: EX
reset Node2
dlm_recover_rsbs()
recover_lvb()
/* The LVB is not trustable if the node with EX fails and
* no lock >= PR is left. We should set RSB_VALNOTVALID for RSB1.
*/
if(!(kb_exflags & DLM_LKF_VALBLK)) /* This means we miss the chance to
return; * to invalid the LVB here.
*/
The 2nd round:
Node 1 Node2
RSB1(become master from recovery)
ocfs2_setattr()
ocfs2_inode_lock(NULL->EX)
/* dlm_lock() return the stale lvb without setting DLM_SBF_VALNOTVALID */
ocfs2_meta_lvb_is_trustable() return 1 /* so we don't refresh inode from disk */
ocfs2_truncate_file()
mlog_bug_on_msg(disk isize != i_size_read(inode)) /* crash! */
The fix is quite straightforward. We keep to set DLM_LKF_VALBLK flag
for dlm_lock() if the lock resource type needs LVB and the fsdlm plugin
is uesed.
Link: http://lkml.kernel.org/r/1481275846-6604-1-git-send-email-zren@suse.com
Signed-off-by: Eric Ren <zren@suse.com>
Reviewed-by: Joseph Qi <jiangqi903@gmail.com>
Cc: Mark Fasheh <mfasheh@versity.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Willy Tarreau <w@1wt.eu>
commit 62a6cfddcc0a5313e7da3e8311ba16226fe0ac10 upstream.
commit 4fcd1813e640 ("Fix reconnect to not defer smb3 session reconnect
long after socket reconnect") added support for Negotiate requests to
be initiated by echo calls.
To avoid delays in calling echo after a reconnect, I added the patch
introduced by the commit b8c600120fc8 ("Call echo service immediately
after socket reconnect").
This has however caused a regression with cifs shares which do not have
support for echo calls to trigger Negotiate requests. On connections
which need to call Negotiation, the echo calls trigger an error which
triggers a reconnect which in turn triggers another echo call. This
results in a loop which is only broken when an operation is performed on
the cifs share. For an idle share, it can DOS a server.
The patch uses the smb_operation can_echo() for cifs so that it is
called only if connection has been already been setup.
kernel bz: 194531
Signed-off-by: Sachin Prabhu <sprabhu@redhat.com>
Tested-by: Jonathan Liu <net147@gmail.com>
Acked-by: Pavel Shilovsky <pshilov@microsoft.com>
Signed-off-by: Steve French <smfrench@gmail.com>
Signed-off-by: Willy Tarreau <w@1wt.eu>
commit a6b5058fafdf508904bbf16c29b24042cef3c496 upstream.
if, when mounting //HOST/share/sub/dir/foo we can query /sub/dir/foo but
not any of the path components above:
- store the /sub/dir/foo prefix in the cifs super_block info
- in the superblock, set root dentry to the subpath dentry (instead of
the share root)
- set a flag in the superblock to remember it
- use prefixpath when building path from a dentry
fixes bso#8950
Signed-off-by: Aurelien Aptel <aaptel@suse.com>
Reviewed-by: Pavel Shilovsky <pshilovsky@samba.org>
Signed-off-by: Steve French <smfrench@gmail.com>
Signed-off-by: Willy Tarreau <w@1wt.eu>
commit a0918f1ce6a43ac980b42b300ec443c154970979 upstream.
STATUS_BAD_NETWORK_NAME can be received during node failover,
causing the flag to be set and making the reconnect thread
always unsuccessful, thereafter.
Once the only place where it is set is removed, the remaining
bits are rendered moot.
Removing it does not prevent "mount" from failing when a non
existent share is passed.
What happens when the share really ceases to exist while the
share is mounted is undefined now as much as it was before.
Signed-off-by: Germano Percossi <germano.percossi@citrix.com>
Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>
Signed-off-by: Steve French <smfrench@gmail.com>
Signed-off-by: Willy Tarreau <w@1wt.eu>
commit e3d240e9d505fc67f8f8735836df97a794bbd946 upstream.
If maxBuf is not 0 but less than a size of SMB2 lock structure
we can end up with a memory corruption.
Signed-off-by: Pavel Shilovsky <pshilov@microsoft.com>
Signed-off-by: Willy Tarreau <w@1wt.eu>
commit 53e0e11efe9289535b060a51d4cf37c25e0d0f2b upstream.
We can not unlock/lock cifs_tcp_ses_lock while walking through ses
and tcon lists because it can corrupt list iterator pointers and
a tcon structure can be released if we don't hold an extra reference.
Fix it by moving a reconnect process to a separate delayed work
and acquiring a reference to every tcon that needs to be reconnected.
Also do not send an echo request on newly established connections.
Signed-off-by: Pavel Shilovsky <pshilov@microsoft.com>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Signed-off-by: Willy Tarreau <w@1wt.eu>
commit 03a9e24ef2aaa5f1f9837356aed79c860521407a upstream.
Recently I receive a bug report that on Linux v3.0 based kerenl, hot add
disk to a md linear device causes kernel crash at linear_congested(). From
the crash image analysis, I find in linear_congested(), mddev->raid_disks
contains value N, but conf->disks[] only has N-1 pointers available. Then
a NULL pointer deference crashes the kernel.
There is a race between linear_add() and linear_congested(), RCU stuffs
used in these two functions cannot avoid the race. Since Linuv v4.0
RCU code is replaced by introducing mddev_suspend(). After checking the
upstream code, it seems linear_congested() is not called in
generic_make_request() code patch, so mddev_suspend() cannot provent it
from being called. The possible race still exists.
Here I explain how the race still exists in current code. For a machine
has many CPUs, on one CPU, linear_add() is called to add a hard disk to a
md linear device; at the same time on other CPU, linear_congested() is
called to detect whether this md linear device is congested before issuing
an I/O request onto it.
Now I use a possible code execution time sequence to demo how the possible
race happens,
seq linear_add() linear_congested()
0 conf=mddev->private
1 oldconf=mddev->private
2 mddev->raid_disks++
3 for (i=0; i<mddev->raid_disks;i++)
4 bdev_get_queue(conf->disks[i].rdev->bdev)
5 mddev->private=newconf
In linear_add() mddev->raid_disks is increased in time seq 2, and on
another CPU in linear_congested() the for-loop iterates conf->disks[i] by
the increased mddev->raid_disks in time seq 3,4. But conf with one more
element (which is a pointer to struct dev_info type) to conf->disks[] is
not updated yet, accessing its structure member in time seq 4 will cause a
NULL pointer deference fault.
To fix this race, there are 2 parts of modification in the patch,
1) Add 'int raid_disks' in struct linear_conf, as a copy of
mddev->raid_disks. It is initialized in linear_conf(), always being
consistent with pointers number of 'struct dev_info disks[]'. When
iterating conf->disks[] in linear_congested(), use conf->raid_disks to
replace mddev->raid_disks in the for-loop, then NULL pointer deference
will not happen again.
2) RCU stuffs are back again, and use kfree_rcu() in linear_add() to
free oldconf memory. Because oldconf may be referenced as mddev->private
in linear_congested(), kfree_rcu() makes sure that its memory will not
be released until no one uses it any more.
Also some code comments are added in this patch, to make this modification
to be easier understandable.
This patch can be applied for kernels since v4.0 after commit:
3be260cc18f8 ("md/linear: remove rcu protections in favour of
suspend/resume"). But this bug is reported on Linux v3.0 based kernel, for
people who maintain kernels before Linux v4.0, they need to do some back
back port to this patch.
Changelog:
- V3: add 'int raid_disks' in struct linear_conf, and use kfree_rcu() to
replace rcu_call() in linear_add().
- v2: add RCU stuffs by suggestion from Shaohua and Neil.
- v1: initial effort.
Signed-off-by: Coly Li <colyli@suse.de>
Cc: Shaohua Li <shli@fb.com>
Cc: Neil Brown <neilb@suse.com>
Signed-off-by: Shaohua Li <shli@fb.com>
Signed-off-by: Willy Tarreau <w@1wt.eu>
commit 816b0acf3deb6d6be5d0519b286fdd4bafade905 upstream.
If first_bad == this_sector when we get the WriteMostly disk
in read_balance(), valid disk will be returned with zero
max_sectors. It'll lead to a dead loop in make_request(), and
OOM will happen because of endless allocation of struct bio.
Since we can't get data from this disk in this case, so
continue for another disk.
Signed-off-by: Wei Fang <fangwei1@huawei.com>
Signed-off-by: Shaohua Li <shli@fb.com>
Cc: Julia Lawall <julia.lawall@lip6.fr>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Signed-off-by: Willy Tarreau <w@1wt.eu>
commit e8d7c33232e5fdfa761c3416539bc5b4acd12db5 upstream.
Current implementation employ 16bit counter of active stripes in lower
bits of bio->bi_phys_segments. If request is big enough to overflow
this counter bio will be completed and freed too early.
Fortunately this not happens in default configuration because several
other limits prevent that: stripe_cache_size * nr_disks effectively
limits count of active stripes. And small max_sectors_kb at lower
disks prevent that during normal read/write operations.
Overflow easily happens in discard if it's enabled by module parameter
"devices_handle_discard_safely" and stripe_cache_size is set big enough.
This patch limits requests size with 256Mb - 8Kb to prevent overflows.
Signed-off-by: Konstantin Khlebnikov <khlebnikov@yandex-team.ru>
Cc: Shaohua Li <shli@kernel.org>
Cc: Neil Brown <neilb@suse.com>
Signed-off-by: Shaohua Li <shli@fb.com>
Signed-off-by: Willy Tarreau <w@1wt.eu>
commit 314c25c56c1ee5026cf99c570bdfe01847927acb upstream.
In dm_sm_metadata_create() we temporarily change the dm_space_map
operations from 'ops' (whose .destroy function deallocates the
sm_metadata) to 'bootstrap_ops' (whose .destroy function doesn't).
If dm_sm_metadata_create() fails in sm_ll_new_metadata() or
sm_ll_extend(), it exits back to dm_tm_create_internal(), which calls
dm_sm_destroy() with the intention of freeing the sm_metadata, but it
doesn't (because the dm_space_map operations is still set to
'bootstrap_ops').
Fix this by setting the dm_space_map operations back to 'ops' if
dm_sm_metadata_create() fails when it is set to 'bootstrap_ops'.
[js] no nr_blocks test in 3.12 yet
Signed-off-by: Benjamin Marzinski <bmarzins@redhat.com>
Acked-by: Joe Thornber <ejt@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Signed-off-by: Willy Tarreau <w@1wt.eu>
commit 265e9098bac02bc5e36cda21fdbad34cb5b2f48d upstream.
In crypt_set_key(), if a failure occurs while replacing the old key
(e.g. tfm->setkey() fails) the key must not have DM_CRYPT_KEY_VALID flag
set. Otherwise, the crypto layer would have an invalid key that still
has DM_CRYPT_KEY_VALID flag set.
Signed-off-by: Ondrej Kozina <okozina@redhat.com>
Reviewed-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Willy Tarreau <w@1wt.eu>
commit ac34f15e0c6d2fd58480052b6985f6991fb53bcc upstream.
When tearing down a block device early in its lifetime, userspace may
still be performing discovery actions like blkdev_ioctl() to re-read
partitions.
The nvdimm_revalidate_disk() implementation depends on
disk->driverfs_dev to be valid at entry. However, it is set to NULL in
del_gendisk() and fatally this is happening *before* the disk device is
deleted from userspace view.
There's no reason for del_gendisk() to clear ->driverfs_dev. That
device is the parent of the disk. It is guaranteed to not be freed
until the disk, as a child, drops its ->parent reference.
We could also fix this issue locally in nvdimm_revalidate_disk() by
using disk_to_dev(disk)->parent, but lets fix it globally since
->driverfs_dev follows the lifetime of the parent. Longer term we
should probably just add a @parent parameter to add_disk(), and stop
carrying this pointer in the gendisk.
BUG: unable to handle kernel NULL pointer dereference at (null)
IP: [<ffffffffa00340a8>] nvdimm_revalidate_disk+0x18/0x90 [libnvdimm]
CPU: 2 PID: 538 Comm: systemd-udevd Tainted: G O 4.4.0-rc5 #2257
[..]
Call Trace:
[<ffffffff8143e5c7>] rescan_partitions+0x87/0x2c0
[<ffffffff810f37f9>] ? __lock_is_held+0x49/0x70
[<ffffffff81438c62>] __blkdev_reread_part+0x72/0xb0
[<ffffffff81438cc5>] blkdev_reread_part+0x25/0x40
[<ffffffff8143982d>] blkdev_ioctl+0x4fd/0x9c0
[<ffffffff811246c9>] ? current_kernel_time64+0x69/0xd0
[<ffffffff812916dd>] block_ioctl+0x3d/0x50
[<ffffffff81264c38>] do_vfs_ioctl+0x308/0x560
[<ffffffff8115dbd1>] ? __audit_syscall_entry+0xb1/0x100
[<ffffffff810031d6>] ? do_audit_syscall_entry+0x66/0x70
[<ffffffff81264f09>] SyS_ioctl+0x79/0x90
[<ffffffff81902672>] entry_SYSCALL_64_fastpath+0x12/0x76
Cc: Jan Kara <jack@suse.cz>
Cc: Jens Axboe <axboe@fb.com>
Reported-by: Robert Hu <robert.hu@intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Willy Tarreau <w@1wt.eu>
commit 25cdb64510644f3e854d502d69c73f21c6df88a9 upstream.
The WRITE_SAME commands are not present in the blk_default_cmd_filter
write_ok list, and thus are failed with -EPERM when the SG_IO ioctl()
is executed without CAP_SYS_RAWIO capability (e.g., unprivileged users).
[ sg_io() -> blk_fill_sghdr_rq() > blk_verify_command() -> -EPERM ]
The problem can be reproduced with the sg_write_same command
# sg_write_same --num 1 --xferlen 512 /dev/sda
#
# capsh --drop=cap_sys_rawio -- -c \
'sg_write_same --num 1 --xferlen 512 /dev/sda'
Write same: pass through os error: Operation not permitted
#
For comparison, the WRITE_VERIFY command does not observe this problem,
since it is in that list:
# capsh --drop=cap_sys_rawio -- -c \
'sg_write_verify --num 1 --ilen 512 --lba 0 /dev/sda'
#
So, this patch adds the WRITE_SAME commands to the list, in order
for the SG_IO ioctl to finish successfully:
# capsh --drop=cap_sys_rawio -- -c \
'sg_write_same --num 1 --xferlen 512 /dev/sda'
#
That case happens to be exercised by QEMU KVM guests with 'scsi-block' devices
(qemu "-device scsi-block" [1], libvirt "<disk type='block' device='lun'>" [2]),
which employs the SG_IO ioctl() and runs as an unprivileged user (libvirt-qemu).
In that scenario, when a filesystem (e.g., ext4) performs its zero-out calls,
which are translated to write-same calls in the guest kernel, and then into
SG_IO ioctls to the host kernel, SCSI I/O errors may be observed in the guest:
[...] sd 0:0:0:0: [sda] tag#0 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[...] sd 0:0:0:0: [sda] tag#0 Sense Key : Aborted Command [current]
[...] sd 0:0:0:0: [sda] tag#0 Add. Sense: I/O process terminated
[...] sd 0:0:0:0: [sda] tag#0 CDB: Write Same(10) 41 00 01 04 e0 78 00 00 08 00
[...] blk_update_request: I/O error, dev sda, sector 17096824
Links:
[1] http://git.qemu.org/?p=qemu.git;a=commit;h=336a6915bc7089fb20fea4ba99972ad9a97c5f52
[2] https://libvirt.org/formatdomain.html#elementsDisks (see 'disk' -> 'device')
Signed-off-by: Mauricio Faria de Oliveira <mauricfo@linux.vnet.ibm.com>
Signed-off-by: Brahadambal Srinivasan <latha@linux.vnet.ibm.com>
Reported-by: Manjunatha H R <manjuhr1@in.ibm.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@fb.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sumit Semwal <sumit.semwal@linaro.org>
Signed-off-by: Willy Tarreau <w@1wt.eu>
commit 05ac5aa18abd7db341e54df4ae2b4c98ea0e43b7 upstream.
We've fixed the race condition problem in calculating ext4 checksum
value in commit b47820edd163 ("ext4: avoid modifying checksum fields
directly during checksum veficationon"). However, by this change,
when calculating the checksum value of inode whose i_extra_size is
less than 4, we couldn't calculate the checksum value in a proper way.
This problem was found and reported by Nix, Thank you.
Reported-by: Nix <nix@esperi.org.uk>
Signed-off-by: Daeho Jeong <daeho.jeong@samsung.com>
Signed-off-by: Youngjin Gil <youngjin.gil@samsung.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Willy Tarreau <w@1wt.eu>
commit 4753d8a24d4588657bc0a4cd66d4e282dff15c8c upstream.
If the file system requires journal recovery, and the device is
read-ony, return EROFS to the mount system call. This allows xfstests
generic/050 to pass.
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Willy Tarreau <w@1wt.eu>
commit 97abd7d4b5d9c48ec15c425485f054e1c15e591b upstream.
If the journal is aborted, the needs_recovery feature flag should not
be removed. Otherwise, it's the journal might not get replayed and
this could lead to more data getting lost.
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Signed-off-by: Willy Tarreau <w@1wt.eu>
commit cd648b8a8fd5071d232242d5ee7ee3c0815776af upstream.
If filesystem groups are artifically small (using parameter -g to
mkfs.ext4), ext4_mb_normalize_request() can result in a request that is
larger than a block group. Trim the request size to not confuse
allocation code.
Reported-by: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Willy Tarreau <w@1wt.eu>
commit 2ba3e6e8afc9b6188b471f27cf2b5e3cf34e7af2 upstream.
It is OK for s_first_meta_bg to be equal to the number of block group
descriptor blocks. (It rarely happens, but it shouldn't cause any
problems.)
https://bugzilla.kernel.org/show_bug.cgi?id=194567
Fixes: 3a4b77cd47bb837b8557595ec7425f281f2ca1fe
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Willy Tarreau <w@1wt.eu>
commit e112666b4959b25a8552d63bc564e1059be703e8 upstream.
If the journal has been aborted, we shouldn't mark the underlying
buffer head as dirty, since that will cause the metadata block to get
modified. And if the journal has been aborted, we shouldn't allow
this since it will almost certainly lead to a corrupted file system.
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Willy Tarreau <w@1wt.eu>
commit 3a4b77cd47bb837b8557595ec7425f281f2ca1fe upstream.
Ralf Spenneberg reported that he hit a kernel crash when mounting a
modified ext4 image. And it turns out that kernel crashed when
calculating fs overhead (ext4_calculate_overhead()), this is because
the image has very large s_first_meta_bg (debug code shows it's
842150400), and ext4 overruns the memory in count_overhead() when
setting bitmap buffer, which is PAGE_SIZE.
ext4_calculate_overhead():
buf = get_zeroed_page(GFP_NOFS); <=== PAGE_SIZE buffer
blks = count_overhead(sb, i, buf);
count_overhead():
for (j = ext4_bg_num_gdb(sb, grp); j > 0; j--) { <=== j = 842150400
ext4_set_bit(EXT4_B2C(sbi, s++), buf); <=== buffer overrun
count++;
}
This can be reproduced easily for me by this script:
#!/bin/bash
rm -f fs.img
mkdir -p /mnt/ext4
fallocate -l 16M fs.img
mke2fs -t ext4 -O bigalloc,meta_bg,^resize_inode -F fs.img
debugfs -w -R "ssv first_meta_bg 842150400" fs.img
mount -o loop fs.img /mnt/ext4
Fix it by validating s_first_meta_bg first at mount time, and
refusing to mount if its value exceeds the largest possible meta_bg
number.
[js] use EXT4_HAS_INCOMPAT_FEATURE instead of new
ext4_has_feature_meta_bg
Reported-by: Ralf Spenneberg <ralf@os-t.de>
Signed-off-by: Eryu Guan <guaneryu@gmail.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Andreas Dilger <adilger@dilger.ca>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Signed-off-by: Willy Tarreau <w@1wt.eu>
commit c48ae41bafe31e9a66d8be2ced4e42a6b57fa814 upstream.
The commit "ext4: sanity check the block and cluster size at mount
time" should prevent any problems, but in case the superblock is
modified while the file system is mounted, add an extra safety check
to make sure we won't overrun the allocated buffer.
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Willy Tarreau <w@1wt.eu>
commit 5aee0f8a3f42c94c5012f1673420aee96315925a upstream.
Fix a large number of problems with how we handle mount options in the
superblock. For one, if the string in the superblock is long enough
that it is not null terminated, we could run off the end of the string
and try to interpret superblocks fields as characters. It's unlikely
this will cause a security problem, but it could result in an invalid
parse. Also, parse_options is destructive to the string, so in some
cases if there is a comma-separated string, it would be modified in
the superblock. (Fortunately it only happens on file systems with a
1k block size.)
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Willy Tarreau <w@1wt.eu>
commit cd6bb35bf7f6d7d922509bf50265383a0ceabe96 upstream.
Centralize the checks for inodes_per_block and be more strict to make
sure the inodes_per_block_group can't end up being zero.
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Andreas Dilger <adilger@dilger.ca>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Signed-off-by: Willy Tarreau <w@1wt.eu>
commit 2571e739677f1e4c0c63f5ed49adcc0857923625 upstream.
So we can read a btree block via readahead or intentional read,
and we can end up with a memory leak when something happens as
follows,
1) readahead starts to read block A but does not wait for read
completion,
2) btree_readpage_end_io_hook finds that block A is corrupted,
and it needs to clear all block A's pages' uptodate bit.
3) meanwhile an intentional read kicks in and checks block A's
pages' uptodate to decide which page needs to be read.
4) when some pages have the uptodate bit during 3)'s check so
3) doesn't count them for eb->io_pages, but they are later
cleared by 2) so we has to readpage on the page, we get
the wrong eb->io_pages which results in a memory leak of
this block.
This fixes the problem by firstly getting all pages's locking and
then checking pages' uptodate bit.
t1(readahead) t2(readahead endio) t3(the following read)
read_extent_buffer_pages end_bio_extent_readpage
for pg in eb: for page 0,1,2 in eb:
if pg is uptodate: btree_readpage_end_io_hook(pg)
num_reads++ if uptodate:
eb->io_pages = num_reads SetPageUptodate(pg) _______________
for pg in eb: for page 3 in eb: read_extent_buffer_pages
if pg is NOT uptodate: btree_readpage_end_io_hook(pg) for pg in eb:
__extent_read_full_page(pg) sanity check reports something wrong if pg is uptodate:
clear_extent_buffer_uptodate(eb) num_reads++
for pg in eb: eb->io_pages = num_reads
ClearPageUptodate(page) _______________
for pg in eb:
if pg is NOT uptodate:
__extent_read_full_page(pg)
So t3's eb->io_pages is not consistent with the number of pages it's reading,
and during endio(), atomic_dec_and_test(&eb->io_pages) will get a negative
number so that we're not able to free the eb.
Signed-off-by: Liu Bo <bo.li.liu@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Willy Tarreau <w@1wt.eu>
commit 081fafddc3ff1e86e36024b0177c08e340b19a12 upstream.
This reverts commit 644d10716875b24388680925d6c7502420987bfe, upstream
commit 6f8960541b1eb6054a642da48daae2320fddba93.
The original patch for mainline, 6f8960541b1 (Btrfs: don't delay
inode ref updates during log replay) lists 1d52c78afbb (Btrfs: try
not to ENOSPC on log replay) as the only pre-3.18 dependency, but it
also depends on 67de11769bd (Btrfs: introduce the delayed inode ref
deletion for the single link inode), which was introduced in 3.14
and isn't in 3.12.y.
The -stable commit added the check to btrfs_delayed_update_inode,
which may look similar to btrfs_delayed_delete_inode_ref, but it's
only superficial. The tops of both functions handle typical
delayed node boilerplate. The upshot is that the patch is harmless
since the caller already checks to see if we're doing log recovery,
so we're not breaking anything. It should be reverted because it
makes it appear as if this issue was fixed for users who did
backport 67de11769bd, when it is not.
Signed-off-by: Jeff Mahoney <jeffm@suse.com>
Signed-off-by: Willy Tarreau <w@1wt.eu>
[ Upstream commit 5edabca9d4cff7f1f2b68f0bac55ef99d9798ba4 ]
In the current DCCP implementation an skb for a DCCP_PKT_REQUEST packet
is forcibly freed via __kfree_skb in dccp_rcv_state_process if
dccp_v6_conn_request successfully returns.
However, if IPV6_RECVPKTINFO is set on a socket, the address of the skb
is saved to ireq->pktopts and the ref count for skb is incremented in
dccp_v6_conn_request, so skb is still in use. Nevertheless, it gets freed
in dccp_rcv_state_process.
Fix by calling consume_skb instead of doing goto discard and therefore
calling __kfree_skb.
Similar fixes for TCP:
fb7e2399ec [TCP]: skb is unexpectedly freed.
0aea76d35c9651d55bbaf746e7914e5f9ae5a25d tcp: SYN packets are now
simply consumed
Signed-off-by: Andrey Konovalov <andreyknvl@google.com>
Acked-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Willy Tarreau <w@1wt.eu>
commit 3e21f4af170bebf47c187c1ff8bf155583c9f3b1 upstream.
The lp_setup() code doesn't apply any bounds checking when passing
"lp=none", and only in this case, resulting in an overflow of the
parport_nr[] array. All versions in Git history are affected.
Reported-By: Roee Hay <roee.hay@hcl.com>
Cc: Ben Hutchings <ben@decadent.org.uk>
Signed-off-by: Willy Tarreau <w@1wt.eu>
commit 657831ffc38e30092a2d5f03d385d710eb88b09a upstream.
syzkaller found a way to trigger double frees from ip_mc_drop_socket()
It turns out that leave a copy of parent mc_list at accept() time,
which is very bad.
Very similar to commit 8b485ce69876 ("tcp: do not inherit
fastopen_req from parent")
Initial report from Pray3r, completed by Andrey one.
Thanks a lot to them !
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: Pray3r <pray3r.z@gmail.com>
Reported-by: Andrey Konovalov <andreyknvl@google.com>
Tested-by: Andrey Konovalov <andreyknvl@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Willy Tarreau <w@1wt.eu>
commit 8310d48b125d19fcd9521d83b8293e63eb1646aa upstream.
In commit 19be0eaffa3a ("mm: remove gup_flags FOLL_WRITE games from
__get_user_pages()"), the mm code was changed from unsetting FOLL_WRITE
after a COW was resolved to setting the (newly introduced) FOLL_COW
instead. Simultaneously, the check in gup.c was updated to still allow
writes with FOLL_FORCE set if FOLL_COW had also been set.
However, a similar check in huge_memory.c was forgotten. As a result,
remote memory writes to ro regions of memory backed by transparent huge
pages cause an infinite loop in the kernel (handle_mm_fault sets
FOLL_COW and returns 0 causing a retry, but follow_trans_huge_pmd bails
out immidiately because `(flags & FOLL_WRITE) && !pmd_write(*pmd)` is
true.
While in this state the process is stil SIGKILLable, but little else
works (e.g. no ptrace attach, no other signals). This is easily
reproduced with the following code (assuming thp are set to always):
#include <assert.h>
#include <fcntl.h>
#include <stdint.h>
#include <stdio.h>
#include <string.h>
#include <sys/mman.h>
#include <sys/stat.h>
#include <sys/types.h>
#include <sys/wait.h>
#include <unistd.h>
#define TEST_SIZE 5 * 1024 * 1024
int main(void) {
int status;
pid_t child;
int fd = open("/proc/self/mem", O_RDWR);
void *addr = mmap(NULL, TEST_SIZE, PROT_READ,
MAP_ANONYMOUS | MAP_PRIVATE, 0, 0);
assert(addr != MAP_FAILED);
pid_t parent_pid = getpid();
if ((child = fork()) == 0) {
void *addr2 = mmap(NULL, TEST_SIZE, PROT_READ | PROT_WRITE,
MAP_ANONYMOUS | MAP_PRIVATE, 0, 0);
assert(addr2 != MAP_FAILED);
memset(addr2, 'a', TEST_SIZE);
pwrite(fd, addr2, TEST_SIZE, (uintptr_t)addr);
return 0;
}
assert(child == waitpid(child, &status, 0));
assert(WIFEXITED(status) && WEXITSTATUS(status) == 0);
return 0;
}
Fix this by updating follow_trans_huge_pmd in huge_memory.c analogously
to the update in gup.c in the original commit. The same pattern exists
in follow_devmap_pmd. However, we should not be able to reach that
check with FOLL_COW set, so add WARN_ONCE to make sure we notice if we
ever do.
[akpm@linux-foundation.org: coding-style fixes]
Link: http://lkml.kernel.org/r/20170106015025.GA38411@juliacomputing.com
Signed-off-by: Keno Fischer <keno@juliacomputing.com>
Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Greg Thelen <gthelen@google.com>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Willy Tarreau <w@1wt.eu>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Hugh Dickins <hughd@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
[bwh: Backported to 3.2:
- Drop change to follow_devmap_pmd()
- pmd_dirty() is not available; check the page flags as in
can_follow_write_pte()
- Adjust context]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
[mhocko:
This has been forward ported from the 3.2 stable tree.
And fixed to return NULL.]
Reviewed-by: Michal Hocko <mhocko@suse.cz>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Signed-off-by: Willy Tarreau <w@1wt.eu>
commit 613cc2b6f272c1a8ad33aefa21cad77af23139f7 upstream.
If you have a process that has set itself to be non-dumpable, and it
then undergoes exec(2), any CLOEXEC file descriptors it has open are
"exposed" during a race window between the dumpable flags of the process
being reset for exec(2) and CLOEXEC being applied to the file
descriptors. This can be exploited by a process by attempting to access
/proc/<pid>/fd/... during this window, without requiring CAP_SYS_PTRACE.
The race in question is after set_dumpable has been (for get_link,
though the trace is basically the same for readlink):
[vfs]
-> proc_pid_link_inode_operations.get_link
-> proc_pid_get_link
-> proc_fd_access_allowed
-> ptrace_may_access(task, PTRACE_MODE_READ_FSCREDS);
Which will return 0, during the race window and CLOEXEC file descriptors
will still be open during this window because do_close_on_exec has not
been called yet. As a result, the ordering of these calls should be
reversed to avoid this race window.
This is of particular concern to container runtimes, where joining a
PID namespace with file descriptors referring to the host filesystem
can result in security issues (since PRCTL_SET_DUMPABLE doesn't protect
against access of CLOEXEC file descriptors -- file descriptors which may
reference filesystem objects the container shouldn't have access to).
Cc: dev@opencontainers.org
Reported-by: Michael Crosby <crosbymichael@gmail.com>
Signed-off-by: Aleksa Sarai <asarai@suse.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Willy Tarreau <w@1wt.eu>
commit 82f2341c94d270421f383641b7cd670e474db56b upstream.
Currently N_HDLC line discipline uses a self-made singly linked list for
data buffers and has n_hdlc.tbuf pointer for buffer retransmitting after
an error.
The commit be10eb7589
("tty: n_hdlc add buffer flushing") introduced racy access to n_hdlc.tbuf.
After tx error concurrent flush_tx_queue() and n_hdlc_send_frames() can put
one data buffer to tx_free_buf_list twice. That causes double free in
n_hdlc_release().
Let's use standard kernel linked list and get rid of n_hdlc.tbuf:
in case of tx error put current data buffer after the head of tx_buf_list.
Signed-off-by: Alexander Popov <alex.popov@linux.com>
Signed-off-by: Willy Tarreau <w@1wt.eu>
commit e9b736d88af1a143530565929390cadf036dc799 upstream.
The class of 4 n_hdls buf locks is the same because a single function
n_hdlc_buf_list_init is used to init all the locks. But since
flush_tx_queue takes n_hdlc->tx_buf_list.spinlock and then calls
n_hdlc_buf_put which takes n_hdlc->tx_free_buf_list.spinlock, lockdep
emits a warning:
=============================================
[ INFO: possible recursive locking detected ]
4.3.0-25.g91e30a7-default #1 Not tainted
---------------------------------------------
a.out/1248 is trying to acquire lock:
(&(&list->spinlock)->rlock){......}, at: [<ffffffffa01fd020>] n_hdlc_buf_put+0x20/0x60 [n_hdlc]
but task is already holding lock:
(&(&list->spinlock)->rlock){......}, at: [<ffffffffa01fdc07>] n_hdlc_tty_ioctl+0x127/0x1d0 [n_hdlc]
other info that might help us debug this:
Possible unsafe locking scenario:
CPU0
----
lock(&(&list->spinlock)->rlock);
lock(&(&list->spinlock)->rlock);
*** DEADLOCK ***
May be due to missing lock nesting notation
2 locks held by a.out/1248:
#0: (&tty->ldisc_sem){++++++}, at: [<ffffffff814c9eb0>] tty_ldisc_ref_wait+0x20/0x50
#1: (&(&list->spinlock)->rlock){......}, at: [<ffffffffa01fdc07>] n_hdlc_tty_ioctl+0x127/0x1d0 [n_hdlc]
...
Call Trace:
...
[<ffffffff81738fd0>] _raw_spin_lock_irqsave+0x50/0x70
[<ffffffffa01fd020>] n_hdlc_buf_put+0x20/0x60 [n_hdlc]
[<ffffffffa01fdc24>] n_hdlc_tty_ioctl+0x144/0x1d0 [n_hdlc]
[<ffffffff814c25c1>] tty_ioctl+0x3f1/0xe40
...
Fix it by initializing the spin_locks separately. This removes also
reduntand memset of a freshly kzallocated space.
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Reported-by: Dmitry Vyukov <dvyukov@google.com>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Signed-off-by: Willy Tarreau <w@1wt.eu>
commit 90db10434b163e46da413d34db8d0e77404cc645 upstream.
No caller currently checks the return value of
kvm_io_bus_unregister_dev(). This is evil, as all callers silently go on
freeing their device. A stale reference will remain in the io_bus,
getting at least used again, when the iobus gets teared down on
kvm_destroy_vm() - leading to use after free errors.
There is nothing the callers could do, except retrying over and over
again.
So let's simply remove the bus altogether, print an error and make
sure no one can access this broken bus again (returning -ENOMEM on any
attempt to access it).
Fixes: e93f8a0f82 ("KVM: convert io_bus to SRCU")
Reported-by: Dmitry Vyukov <dvyukov@google.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
[wt: no kvm_io_bus_read_cookie in 3.10, slightly different constructs]
Signed-off-by: Willy Tarreau <w@1wt.eu>
commit 6ea34c9b78c10289846db0abeebd6b84d5aca084 upstream.
We can easily reach the 1000 limit by start VM with a couple
hundred I/O devices (multifunction=on). The hardcode limit
already been adjusted 3 times (6 ~ 200 ~ 300 ~ 1000).
In userspace, we already have maximum file descriptor to
limit ioeventfd count. But kvm_io_bus devices also are used
for pit, pic, ioapic, coalesced_mmio. They couldn't be limited
by maximum file descriptor.
Currently only ioeventfds take too much kvm_io_bus devices,
so just exclude it from counting kvm_io_range limit.
Also fixed one indent issue in kvm_host.h
Signed-off-by: Amos Kong <akong@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Gleb Natapov <gleb@redhat.com>
[wt: next patch depends on this one]
Signed-off-by: Willy Tarreau <w@1wt.eu>
commit df630b8c1e851b5e265dc2ca9c87222e342c093b upstream.
When releasing the bus, let's clear the bus pointers to mark it out. If
any further device unregister happens on this bus, we know that we're
done if we found the bus being released already.
Signed-off-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Radim KrÄmáŠ<rkrcmar@redhat.com>
Signed-off-by: Willy Tarreau <w@1wt.eu>
commit dfcb9f4f99f1e9a49e43398a7bfbf56927544af1 upstream.
commit 2dcab5984841 ("sctp: avoid BUG_ON on sctp_wait_for_sndbuf")
attempted to avoid a BUG_ON call when the association being used for a
sendmsg() is blocked waiting for more sndbuf and another thread did a
peeloff operation on such asoc, moving it to another socket.
As Ben Hutchings noticed, then in such case it would return without
locking back the socket and would cause two unlocks in a row.
Further analysis also revealed that it could allow a double free if the
application managed to peeloff the asoc that is created during the
sendmsg call, because then sctp_sendmsg() would try to free the asoc
that was created only for that call.
This patch takes another approach. It will deny the peeloff operation
if there is a thread sleeping on the asoc, so this situation doesn't
exist anymore. This avoids the issues described above and also honors
the syscalls that are already being handled (it can be multiple sendmsg
calls).
Joint work with Xin Long.
Fixes: 2dcab5984841 ("sctp: avoid BUG_ON on sctp_wait_for_sndbuf")
Cc: Alexander Popov <alex.popov@linux.com>
Cc: Ben Hutchings <ben@decadent.org.uk>
Signed-off-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Willy Tarreau <w@1wt.eu>
commit 2dcab598484185dea7ec22219c76dcdd59e3cb90 upstream.
Alexander Popov reported that an application may trigger a BUG_ON in
sctp_wait_for_sndbuf if the socket tx buffer is full, a thread is
waiting on it to queue more data and meanwhile another thread peels off
the association being used by the first thread.
This patch replaces the BUG_ON call with a proper error handling. It
will return -EPIPE to the original sendmsg call, similarly to what would
have been done if the association wasn't found in the first place.
Acked-by: Alexander Popov <alex.popov@linux.com>
Signed-off-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Reviewed-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Willy Tarreau <w@1wt.eu>
commit abb6013cca147ad940b0e9fee260d2d9e93b7018 upstream.
when read/write the 64bit data, the correct lock should be hold.
Fixes: 87b6d218f3 ("tunnel: implement 64 bits statistics")
Cc: Stephen Hemminger <stephen@networkplumber.org>
Cc: Eric Dumazet <edumazet@google.com>
Signed-off-by: Li RongQing <roy.qing.li@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Willy Tarreau <w@1wt.eu>
Takashi Iwai