62bdbcf4f2
commit 0294112ee3135fbd15eaa70015af8283642dd970 upstream. This effectively reverts the following three commits: 7bc10388ccdd ACPI / resources: free memory on error in add_region_before() 0f1b414d1907 ACPI / PNP: Avoid conflicting resource reservations b9a5e5e18fbf ACPI / init: Fix the ordering of acpi_reserve_resources() (commit b9a5e5e18fbf introduced regressions some of which, but not all, were addressed by commit 0f1b414d1907 and commit 7bc10388ccdd was a fixup on top of the latter) and causes ACPI fixed hardware resources to be reserved at the fs_initcall_sync stage of system initialization. The story is as follows. First, a boot regression was reported due to an apparent resource reservation ordering change after a commit that shouldn't lead to such changes. Investigation led to the conclusion that the problem happened because acpi_reserve_resources() was executed at the device_initcall() stage of system initialization which wasn't strictly ordered with respect to driver initialization (and with respect to the initialization of the pcieport driver in particular), so a random change causing the device initcalls to be run in a different order might break things. The response to that was to attempt to run acpi_reserve_resources() as soon as we knew that ACPI would be in use (commit b9a5e5e18fbf). However, that turned out to be too early, because it caused resource reservations made by the PNP system driver to fail on at least one system and that failure was addressed by commit 0f1b414d1907. That fix still turned out to be insufficient, though, because calling acpi_reserve_resources() before the fs_initcall stage of system initialization caused a boot regression to happen on the eCAFE EC-800-H20G/S netbook. That meant that we only could call acpi_reserve_resources() at the fs_initcall initialization stage or later, but then we might just as well call it after the PNP initalization in which case commit 0f1b414d1907 wouldn't be necessary any more. For this reason, the changes made by commit 0f1b414d1907 are reverted (along with a memory leak fixup on top of that commit), the changes made by commit b9a5e5e18fbf that went too far are reverted too and acpi_reserve_resources() is changed into fs_initcall_sync, which will cause it to be executed after the PNP subsystem initialization (which is an fs_initcall) and before device initcalls (including the pcieport driver initialization) which should avoid the initial issue. Link: https://bugzilla.kernel.org/show_bug.cgi?id=100581 Link: http://marc.info/?t=143092384600002&r=1&w=2 Link: https://bugzilla.kernel.org/show_bug.cgi?id=99831 Link: http://marc.info/?t=143389402600001&r=1&w=2 Fixes: b9a5e5e18fbf "ACPI / init: Fix the ordering of acpi_reserve_resources()" Reported-by: Roland Dreier <roland@purestorage.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Willy Tarreau <w@1wt.eu>
543 lines
15 KiB
C
543 lines
15 KiB
C
/*
|
|
* drivers/acpi/resource.c - ACPI device resources interpretation.
|
|
*
|
|
* Copyright (C) 2012, Intel Corp.
|
|
* Author: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
*
|
|
* ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License version 2 as published
|
|
* by the Free Software Foundation.
|
|
*
|
|
* This program is distributed in the hope that it will be useful, but
|
|
* WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
|
|
* General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License along
|
|
* with this program; if not, write to the Free Software Foundation, Inc.,
|
|
* 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA.
|
|
*
|
|
* ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
|
|
*/
|
|
|
|
#include <linux/acpi.h>
|
|
#include <linux/device.h>
|
|
#include <linux/export.h>
|
|
#include <linux/ioport.h>
|
|
#include <linux/slab.h>
|
|
|
|
#ifdef CONFIG_X86
|
|
#define valid_IRQ(i) (((i) != 0) && ((i) != 2))
|
|
#else
|
|
#define valid_IRQ(i) (true)
|
|
#endif
|
|
|
|
static unsigned long acpi_dev_memresource_flags(u64 len, u8 write_protect,
|
|
bool window)
|
|
{
|
|
unsigned long flags = IORESOURCE_MEM;
|
|
|
|
if (len == 0)
|
|
flags |= IORESOURCE_DISABLED;
|
|
|
|
if (write_protect == ACPI_READ_WRITE_MEMORY)
|
|
flags |= IORESOURCE_MEM_WRITEABLE;
|
|
|
|
if (window)
|
|
flags |= IORESOURCE_WINDOW;
|
|
|
|
return flags;
|
|
}
|
|
|
|
static void acpi_dev_get_memresource(struct resource *res, u64 start, u64 len,
|
|
u8 write_protect)
|
|
{
|
|
res->start = start;
|
|
res->end = start + len - 1;
|
|
res->flags = acpi_dev_memresource_flags(len, write_protect, false);
|
|
}
|
|
|
|
/**
|
|
* acpi_dev_resource_memory - Extract ACPI memory resource information.
|
|
* @ares: Input ACPI resource object.
|
|
* @res: Output generic resource object.
|
|
*
|
|
* Check if the given ACPI resource object represents a memory resource and
|
|
* if that's the case, use the information in it to populate the generic
|
|
* resource object pointed to by @res.
|
|
*/
|
|
bool acpi_dev_resource_memory(struct acpi_resource *ares, struct resource *res)
|
|
{
|
|
struct acpi_resource_memory24 *memory24;
|
|
struct acpi_resource_memory32 *memory32;
|
|
struct acpi_resource_fixed_memory32 *fixed_memory32;
|
|
|
|
switch (ares->type) {
|
|
case ACPI_RESOURCE_TYPE_MEMORY24:
|
|
memory24 = &ares->data.memory24;
|
|
if (!memory24->minimum && !memory24->address_length)
|
|
return false;
|
|
acpi_dev_get_memresource(res, memory24->minimum,
|
|
memory24->address_length,
|
|
memory24->write_protect);
|
|
break;
|
|
case ACPI_RESOURCE_TYPE_MEMORY32:
|
|
memory32 = &ares->data.memory32;
|
|
if (!memory32->minimum && !memory32->address_length)
|
|
return false;
|
|
acpi_dev_get_memresource(res, memory32->minimum,
|
|
memory32->address_length,
|
|
memory32->write_protect);
|
|
break;
|
|
case ACPI_RESOURCE_TYPE_FIXED_MEMORY32:
|
|
fixed_memory32 = &ares->data.fixed_memory32;
|
|
if (!fixed_memory32->address && !fixed_memory32->address_length)
|
|
return false;
|
|
acpi_dev_get_memresource(res, fixed_memory32->address,
|
|
fixed_memory32->address_length,
|
|
fixed_memory32->write_protect);
|
|
break;
|
|
default:
|
|
return false;
|
|
}
|
|
return true;
|
|
}
|
|
EXPORT_SYMBOL_GPL(acpi_dev_resource_memory);
|
|
|
|
static unsigned int acpi_dev_ioresource_flags(u64 start, u64 end, u8 io_decode,
|
|
bool window)
|
|
{
|
|
int flags = IORESOURCE_IO;
|
|
|
|
if (io_decode == ACPI_DECODE_16)
|
|
flags |= IORESOURCE_IO_16BIT_ADDR;
|
|
|
|
if (start > end || end >= 0x10003)
|
|
flags |= IORESOURCE_DISABLED;
|
|
|
|
if (window)
|
|
flags |= IORESOURCE_WINDOW;
|
|
|
|
return flags;
|
|
}
|
|
|
|
static void acpi_dev_get_ioresource(struct resource *res, u64 start, u64 len,
|
|
u8 io_decode)
|
|
{
|
|
u64 end = start + len - 1;
|
|
|
|
res->start = start;
|
|
res->end = end;
|
|
res->flags = acpi_dev_ioresource_flags(start, end, io_decode, false);
|
|
}
|
|
|
|
/**
|
|
* acpi_dev_resource_io - Extract ACPI I/O resource information.
|
|
* @ares: Input ACPI resource object.
|
|
* @res: Output generic resource object.
|
|
*
|
|
* Check if the given ACPI resource object represents an I/O resource and
|
|
* if that's the case, use the information in it to populate the generic
|
|
* resource object pointed to by @res.
|
|
*/
|
|
bool acpi_dev_resource_io(struct acpi_resource *ares, struct resource *res)
|
|
{
|
|
struct acpi_resource_io *io;
|
|
struct acpi_resource_fixed_io *fixed_io;
|
|
|
|
switch (ares->type) {
|
|
case ACPI_RESOURCE_TYPE_IO:
|
|
io = &ares->data.io;
|
|
if (!io->minimum && !io->address_length)
|
|
return false;
|
|
acpi_dev_get_ioresource(res, io->minimum,
|
|
io->address_length,
|
|
io->io_decode);
|
|
break;
|
|
case ACPI_RESOURCE_TYPE_FIXED_IO:
|
|
fixed_io = &ares->data.fixed_io;
|
|
if (!fixed_io->address && !fixed_io->address_length)
|
|
return false;
|
|
acpi_dev_get_ioresource(res, fixed_io->address,
|
|
fixed_io->address_length,
|
|
ACPI_DECODE_10);
|
|
break;
|
|
default:
|
|
return false;
|
|
}
|
|
return true;
|
|
}
|
|
EXPORT_SYMBOL_GPL(acpi_dev_resource_io);
|
|
|
|
/**
|
|
* acpi_dev_resource_address_space - Extract ACPI address space information.
|
|
* @ares: Input ACPI resource object.
|
|
* @res: Output generic resource object.
|
|
*
|
|
* Check if the given ACPI resource object represents an address space resource
|
|
* and if that's the case, use the information in it to populate the generic
|
|
* resource object pointed to by @res.
|
|
*/
|
|
bool acpi_dev_resource_address_space(struct acpi_resource *ares,
|
|
struct resource *res)
|
|
{
|
|
acpi_status status;
|
|
struct acpi_resource_address64 addr;
|
|
bool window;
|
|
u64 len;
|
|
u8 io_decode;
|
|
|
|
switch (ares->type) {
|
|
case ACPI_RESOURCE_TYPE_ADDRESS16:
|
|
case ACPI_RESOURCE_TYPE_ADDRESS32:
|
|
case ACPI_RESOURCE_TYPE_ADDRESS64:
|
|
break;
|
|
default:
|
|
return false;
|
|
}
|
|
|
|
status = acpi_resource_to_address64(ares, &addr);
|
|
if (ACPI_FAILURE(status))
|
|
return true;
|
|
|
|
res->start = addr.minimum;
|
|
res->end = addr.maximum;
|
|
window = addr.producer_consumer == ACPI_PRODUCER;
|
|
|
|
switch(addr.resource_type) {
|
|
case ACPI_MEMORY_RANGE:
|
|
len = addr.maximum - addr.minimum + 1;
|
|
res->flags = acpi_dev_memresource_flags(len,
|
|
addr.info.mem.write_protect,
|
|
window);
|
|
break;
|
|
case ACPI_IO_RANGE:
|
|
io_decode = addr.granularity == 0xfff ?
|
|
ACPI_DECODE_10 : ACPI_DECODE_16;
|
|
res->flags = acpi_dev_ioresource_flags(addr.minimum,
|
|
addr.maximum,
|
|
io_decode, window);
|
|
break;
|
|
case ACPI_BUS_NUMBER_RANGE:
|
|
res->flags = IORESOURCE_BUS;
|
|
break;
|
|
default:
|
|
res->flags = 0;
|
|
}
|
|
|
|
return true;
|
|
}
|
|
EXPORT_SYMBOL_GPL(acpi_dev_resource_address_space);
|
|
|
|
/**
|
|
* acpi_dev_resource_ext_address_space - Extract ACPI address space information.
|
|
* @ares: Input ACPI resource object.
|
|
* @res: Output generic resource object.
|
|
*
|
|
* Check if the given ACPI resource object represents an extended address space
|
|
* resource and if that's the case, use the information in it to populate the
|
|
* generic resource object pointed to by @res.
|
|
*/
|
|
bool acpi_dev_resource_ext_address_space(struct acpi_resource *ares,
|
|
struct resource *res)
|
|
{
|
|
struct acpi_resource_extended_address64 *ext_addr;
|
|
bool window;
|
|
u64 len;
|
|
u8 io_decode;
|
|
|
|
if (ares->type != ACPI_RESOURCE_TYPE_EXTENDED_ADDRESS64)
|
|
return false;
|
|
|
|
ext_addr = &ares->data.ext_address64;
|
|
|
|
res->start = ext_addr->minimum;
|
|
res->end = ext_addr->maximum;
|
|
window = ext_addr->producer_consumer == ACPI_PRODUCER;
|
|
|
|
switch(ext_addr->resource_type) {
|
|
case ACPI_MEMORY_RANGE:
|
|
len = ext_addr->maximum - ext_addr->minimum + 1;
|
|
res->flags = acpi_dev_memresource_flags(len,
|
|
ext_addr->info.mem.write_protect,
|
|
window);
|
|
break;
|
|
case ACPI_IO_RANGE:
|
|
io_decode = ext_addr->granularity == 0xfff ?
|
|
ACPI_DECODE_10 : ACPI_DECODE_16;
|
|
res->flags = acpi_dev_ioresource_flags(ext_addr->minimum,
|
|
ext_addr->maximum,
|
|
io_decode, window);
|
|
break;
|
|
case ACPI_BUS_NUMBER_RANGE:
|
|
res->flags = IORESOURCE_BUS;
|
|
break;
|
|
default:
|
|
res->flags = 0;
|
|
}
|
|
|
|
return true;
|
|
}
|
|
EXPORT_SYMBOL_GPL(acpi_dev_resource_ext_address_space);
|
|
|
|
/**
|
|
* acpi_dev_irq_flags - Determine IRQ resource flags.
|
|
* @triggering: Triggering type as provided by ACPI.
|
|
* @polarity: Interrupt polarity as provided by ACPI.
|
|
* @shareable: Whether or not the interrupt is shareable.
|
|
*/
|
|
unsigned long acpi_dev_irq_flags(u8 triggering, u8 polarity, u8 shareable)
|
|
{
|
|
unsigned long flags;
|
|
|
|
if (triggering == ACPI_LEVEL_SENSITIVE)
|
|
flags = polarity == ACPI_ACTIVE_LOW ?
|
|
IORESOURCE_IRQ_LOWLEVEL : IORESOURCE_IRQ_HIGHLEVEL;
|
|
else
|
|
flags = polarity == ACPI_ACTIVE_LOW ?
|
|
IORESOURCE_IRQ_LOWEDGE : IORESOURCE_IRQ_HIGHEDGE;
|
|
|
|
if (shareable == ACPI_SHARED)
|
|
flags |= IORESOURCE_IRQ_SHAREABLE;
|
|
|
|
return flags | IORESOURCE_IRQ;
|
|
}
|
|
EXPORT_SYMBOL_GPL(acpi_dev_irq_flags);
|
|
|
|
static void acpi_dev_irqresource_disabled(struct resource *res, u32 gsi)
|
|
{
|
|
res->start = gsi;
|
|
res->end = gsi;
|
|
res->flags = IORESOURCE_IRQ | IORESOURCE_DISABLED;
|
|
}
|
|
|
|
static void acpi_dev_get_irqresource(struct resource *res, u32 gsi,
|
|
u8 triggering, u8 polarity, u8 shareable,
|
|
bool legacy)
|
|
{
|
|
int irq, p, t;
|
|
|
|
if (!valid_IRQ(gsi)) {
|
|
acpi_dev_irqresource_disabled(res, gsi);
|
|
return;
|
|
}
|
|
|
|
/*
|
|
* In IO-APIC mode, use overrided attribute. Two reasons:
|
|
* 1. BIOS bug in DSDT
|
|
* 2. BIOS uses IO-APIC mode Interrupt Source Override
|
|
*
|
|
* We do this only if we are dealing with IRQ() or IRQNoFlags()
|
|
* resource (the legacy ISA resources). With modern ACPI 5 devices
|
|
* using extended IRQ descriptors we take the IRQ configuration
|
|
* from _CRS directly.
|
|
*/
|
|
if (legacy && !acpi_get_override_irq(gsi, &t, &p)) {
|
|
u8 trig = t ? ACPI_LEVEL_SENSITIVE : ACPI_EDGE_SENSITIVE;
|
|
u8 pol = p ? ACPI_ACTIVE_LOW : ACPI_ACTIVE_HIGH;
|
|
|
|
if (triggering != trig || polarity != pol) {
|
|
pr_warning("ACPI: IRQ %d override to %s, %s\n", gsi,
|
|
t ? "level" : "edge", p ? "low" : "high");
|
|
triggering = trig;
|
|
polarity = pol;
|
|
}
|
|
}
|
|
|
|
res->flags = acpi_dev_irq_flags(triggering, polarity, shareable);
|
|
irq = acpi_register_gsi(NULL, gsi, triggering, polarity);
|
|
if (irq >= 0) {
|
|
res->start = irq;
|
|
res->end = irq;
|
|
} else {
|
|
acpi_dev_irqresource_disabled(res, gsi);
|
|
}
|
|
}
|
|
|
|
/**
|
|
* acpi_dev_resource_interrupt - Extract ACPI interrupt resource information.
|
|
* @ares: Input ACPI resource object.
|
|
* @index: Index into the array of GSIs represented by the resource.
|
|
* @res: Output generic resource object.
|
|
*
|
|
* Check if the given ACPI resource object represents an interrupt resource
|
|
* and @index does not exceed the resource's interrupt count (true is returned
|
|
* in that case regardless of the results of the other checks)). If that's the
|
|
* case, register the GSI corresponding to @index from the array of interrupts
|
|
* represented by the resource and populate the generic resource object pointed
|
|
* to by @res accordingly. If the registration of the GSI is not successful,
|
|
* IORESOURCE_DISABLED will be set it that object's flags.
|
|
*/
|
|
bool acpi_dev_resource_interrupt(struct acpi_resource *ares, int index,
|
|
struct resource *res)
|
|
{
|
|
struct acpi_resource_irq *irq;
|
|
struct acpi_resource_extended_irq *ext_irq;
|
|
|
|
switch (ares->type) {
|
|
case ACPI_RESOURCE_TYPE_IRQ:
|
|
/*
|
|
* Per spec, only one interrupt per descriptor is allowed in
|
|
* _CRS, but some firmware violates this, so parse them all.
|
|
*/
|
|
irq = &ares->data.irq;
|
|
if (index >= irq->interrupt_count) {
|
|
acpi_dev_irqresource_disabled(res, 0);
|
|
return false;
|
|
}
|
|
acpi_dev_get_irqresource(res, irq->interrupts[index],
|
|
irq->triggering, irq->polarity,
|
|
irq->sharable, true);
|
|
break;
|
|
case ACPI_RESOURCE_TYPE_EXTENDED_IRQ:
|
|
ext_irq = &ares->data.extended_irq;
|
|
if (index >= ext_irq->interrupt_count) {
|
|
acpi_dev_irqresource_disabled(res, 0);
|
|
return false;
|
|
}
|
|
acpi_dev_get_irqresource(res, ext_irq->interrupts[index],
|
|
ext_irq->triggering, ext_irq->polarity,
|
|
ext_irq->sharable, false);
|
|
break;
|
|
default:
|
|
return false;
|
|
}
|
|
|
|
return true;
|
|
}
|
|
EXPORT_SYMBOL_GPL(acpi_dev_resource_interrupt);
|
|
|
|
/**
|
|
* acpi_dev_free_resource_list - Free resource from %acpi_dev_get_resources().
|
|
* @list: The head of the resource list to free.
|
|
*/
|
|
void acpi_dev_free_resource_list(struct list_head *list)
|
|
{
|
|
struct resource_list_entry *rentry, *re;
|
|
|
|
list_for_each_entry_safe(rentry, re, list, node) {
|
|
list_del(&rentry->node);
|
|
kfree(rentry);
|
|
}
|
|
}
|
|
EXPORT_SYMBOL_GPL(acpi_dev_free_resource_list);
|
|
|
|
struct res_proc_context {
|
|
struct list_head *list;
|
|
int (*preproc)(struct acpi_resource *, void *);
|
|
void *preproc_data;
|
|
int count;
|
|
int error;
|
|
};
|
|
|
|
static acpi_status acpi_dev_new_resource_entry(struct resource *r,
|
|
struct res_proc_context *c)
|
|
{
|
|
struct resource_list_entry *rentry;
|
|
|
|
rentry = kmalloc(sizeof(*rentry), GFP_KERNEL);
|
|
if (!rentry) {
|
|
c->error = -ENOMEM;
|
|
return AE_NO_MEMORY;
|
|
}
|
|
rentry->res = *r;
|
|
list_add_tail(&rentry->node, c->list);
|
|
c->count++;
|
|
return AE_OK;
|
|
}
|
|
|
|
static acpi_status acpi_dev_process_resource(struct acpi_resource *ares,
|
|
void *context)
|
|
{
|
|
struct res_proc_context *c = context;
|
|
struct resource r;
|
|
int i;
|
|
|
|
if (c->preproc) {
|
|
int ret;
|
|
|
|
ret = c->preproc(ares, c->preproc_data);
|
|
if (ret < 0) {
|
|
c->error = ret;
|
|
return AE_CTRL_TERMINATE;
|
|
} else if (ret > 0) {
|
|
return AE_OK;
|
|
}
|
|
}
|
|
|
|
memset(&r, 0, sizeof(r));
|
|
|
|
if (acpi_dev_resource_memory(ares, &r)
|
|
|| acpi_dev_resource_io(ares, &r)
|
|
|| acpi_dev_resource_address_space(ares, &r)
|
|
|| acpi_dev_resource_ext_address_space(ares, &r))
|
|
return acpi_dev_new_resource_entry(&r, c);
|
|
|
|
for (i = 0; acpi_dev_resource_interrupt(ares, i, &r); i++) {
|
|
acpi_status status;
|
|
|
|
status = acpi_dev_new_resource_entry(&r, c);
|
|
if (ACPI_FAILURE(status))
|
|
return status;
|
|
}
|
|
|
|
return AE_OK;
|
|
}
|
|
|
|
/**
|
|
* acpi_dev_get_resources - Get current resources of a device.
|
|
* @adev: ACPI device node to get the resources for.
|
|
* @list: Head of the resultant list of resources (must be empty).
|
|
* @preproc: The caller's preprocessing routine.
|
|
* @preproc_data: Pointer passed to the caller's preprocessing routine.
|
|
*
|
|
* Evaluate the _CRS method for the given device node and process its output by
|
|
* (1) executing the @preproc() rountine provided by the caller, passing the
|
|
* resource pointer and @preproc_data to it as arguments, for each ACPI resource
|
|
* returned and (2) converting all of the returned ACPI resources into struct
|
|
* resource objects if possible. If the return value of @preproc() in step (1)
|
|
* is different from 0, step (2) is not applied to the given ACPI resource and
|
|
* if that value is negative, the whole processing is aborted and that value is
|
|
* returned as the final error code.
|
|
*
|
|
* The resultant struct resource objects are put on the list pointed to by
|
|
* @list, that must be empty initially, as members of struct resource_list_entry
|
|
* objects. Callers of this routine should use %acpi_dev_free_resource_list() to
|
|
* free that list.
|
|
*
|
|
* The number of resources in the output list is returned on success, an error
|
|
* code reflecting the error condition is returned otherwise.
|
|
*/
|
|
int acpi_dev_get_resources(struct acpi_device *adev, struct list_head *list,
|
|
int (*preproc)(struct acpi_resource *, void *),
|
|
void *preproc_data)
|
|
{
|
|
struct res_proc_context c;
|
|
acpi_handle not_used;
|
|
acpi_status status;
|
|
|
|
if (!adev || !adev->handle || !list_empty(list))
|
|
return -EINVAL;
|
|
|
|
status = acpi_get_handle(adev->handle, METHOD_NAME__CRS, ¬_used);
|
|
if (ACPI_FAILURE(status))
|
|
return 0;
|
|
|
|
c.list = list;
|
|
c.preproc = preproc;
|
|
c.preproc_data = preproc_data;
|
|
c.count = 0;
|
|
c.error = 0;
|
|
status = acpi_walk_resources(adev->handle, METHOD_NAME__CRS,
|
|
acpi_dev_process_resource, &c);
|
|
if (ACPI_FAILURE(status)) {
|
|
acpi_dev_free_resource_list(list);
|
|
return c.error ? c.error : -EIO;
|
|
}
|
|
|
|
return c.count;
|
|
}
|
|
EXPORT_SYMBOL_GPL(acpi_dev_get_resources);
|